Bostik Epoxycote WB Clear is a high performance two component water based industrial epoxy coating system available in a clear finish. Epoxycote WB Clear is designed for floor and wall applications where durability and chemical abrasion resistance is required.

Bostik Paveseal SB is a high performance solvent based clear acrylic coating for a protective and decorative coating for concrete and masonry. Suitable for use on all types of structures whether they be new or old, providing a waterproof clear gloss finish, hard wearing and durable. It provides a tough layer to a variety of surfaces. Paveseals SB UV filter ensures a finish that is durable under Australias harsh weather conditions. Paveseal SB protects concrete from aggressive atmosphere, moisture ingress and carbonation. Paveseal SB dramatically reduces the penetration of carbon dioxide through to the concrete, while at the same time allows the concrete to breathe.

Bostik Aquashield SB40 is a protective water-resistant sealer to protect and treat masonry and cementitious structures for the prevention of water absorption. Used in conjunction with both Paveseal SB and Paveseal SB Textured to form a complete concrete protection system that is highly penetrative to form an invisible, breathable impregnating sealer. Aquashield SB40 impregnates concrete to protect from ingress of salts, chlorides. It protects reinforced concrete from waterborne chloride ions making it an ideal protective surface treatment.

Bostik Guardcote WB is a high performance water based, clear two component epoxy protective sealer and surface hardener. Guardcote WB is designed for floor and wall applications where a low degree of abrasive resistance is required. Guardcote WB forms a relative impervious film protecting concrete from oils and chemical ingress. Guardcote forms a primer on porous concrete prior to the application of Bostik Epoxycote WB.

Bostik AVS Dampseal HP is an effective economical two part cementitious coating for waterproofing the positive or negative side of reinforced structural concrete walls and the positive side only of reinforced structural concrete block walls. Dampseal HP is suitable for the inside (negative side) of concrete basement walls and belowground car parks to a belowground depth of 40 metres. Dampseal HP has been formulated with flexibility and will accept a degree of building movement and bridge hairline surface cracks. Major cracks should be repaired with a compatible material prior to coating with Dampseal HP.

Bostik AVS Suregrip is a high performance slip resistant, water based, coloured coating designed for easy application to asphalt, concrete, steel & timber.

Bostik AVS Armagrip Coloured is a solvent free (100% solids) epoxy floor coating with extremely low volatile organic content providing excellent abrasion and chemical resistance. Quartz can be added to provide slip resistance. Armagrip Coloured provides a high quality decorative chemical resistant floor for laboratories, food preparation areas, schools, garages, workshops, industrial, commercial and domestic areas. This system is designed for internal use and when used in direct sunlight the surface may show yellowing or dulling with age.

Bostik AVS Decofloor is a new approach to seamless coloured-flake flooring which uses state of the art coatings technology to provide a coating system with low odour, extremely low volatile organic content and excellent resistance to abrasion and staining.

Bostik AVS Wetlook is a solvent borne acrylic coating based on methyl methacrylate. It dries to a clear, hard, water repellent non-yellowing film, which has excellent resistance to alkalies. It enhances the oxide colours used in the various types of cement based paving, suppresses the efflorescence which occurs in these products, reduces considerably possible staining of the paving surface from soil, animals and birds, oil/grease and provides a long lasting "wet" appearance to the paving. (Up to 12 months or more depending on climatic conditions.) Wetlook is for use on cement based paving products, exposed aggregate pathways and driveways and concrete driveways and path areas.

Bostik AVS Dynacryl is a solvent borne single pack clear acrylic coating. Dynacryl is a general-purpose clear coating for stable substrates, which will enhance the colour and appearance of the coated material. Dynacryl is non-yellowing and is suitable for exterior and interior applications. Dynacryl meets the requirements of ASTM C-309 moisture vapour transmission of 0.055 gms/sq.cm/72 hours when tested in accordance with ASTM C-156.

Bostik AVS Slatemaster is a solvent borne acrylic coating designed specifically for sealing of slate surfaces. It is supplied ready to use direct from the container without thinning. It dries to a clear, hard, non-yellowing film, which has excellent resistance to alkalies. It enhances the natural colours in the slate tile, producing a glossy finish, which seals the surface and provides a reasonably long lasting protection to the slate's surface. Slatemaster can be used both internally and externally.

Bostik AVS Beckothane is a highly versatile coating material and can be used in a multitude of interior situations where a highly decorative finish with exceptional stain, chemical and abrasion resistance is required. Beckothane can be used on interior timber/parquetry floors, cork tiles, seamless vinyl chip floors and concrete floors for industrial purposes. Cork and timber floors reflect their quiet beauty when coated with Beckothane Clear Polyurethane. Beckothane gives an extraordinary degree of scratch resistance while retaining the softness of cork and the flexibility of timber. The finished coating gives a longwearing floor treatment, which is suitable for use in high traffic areas.

Bostik AVS Flexithane is a non-yellowing single pack polyurethane, which cures by reaction with moisture in the air to an extremely tough and durable film. It is suitable for use on interior cork, timber and masonry surfaces where the finished coating provides a chemical resistant, long wearing, floor treatment suitable for use in traffic areas. Flexithane contains a high level of ultraviolet absorber which enables it to protect substrates from discolouration caused by sunlight. It can be used either as the entire finish system or as a protective glaze coat over conventional polyurethane and epoxy flooring systems.

For information on flooring & timber coatings go to www.boscote.com and www.wood-mans.com.au